In modern mobile advertising, applying UV printed one-way vision vinyl on vehicle windows has become a highly effective solution for businesses, service vehicles, and corporate fleets. This material allows clear visibility from inside the vehicle while displaying sharp, eye-catching graphics on the outside. However, to ensure strong adhesion, long-lasting durability, and a professional finish, the installation process must be done correctly and carefully.
Below is a detailed step-by-step guide shared by LINH ANH ADVERTISING, based on real-world installation experience, suitable for cars, vans, buses, trucks, and commercial vehicles.
1. What Is UV Printed One-Way Vision Vinyl?
One-way vision vinyl is a perforated decal material with tiny holes that allow drivers and passengers to see through the glass from inside the vehicle. When printed using UV printing technology, the ink cures instantly, providing:
-
High color accuracy and sharp images
-
Excellent resistance to sunlight, rain, and weather
-
Long-term outdoor durability
-
Safe visibility for driving
- Political Propaganda Banner, Backdrop & Outdoor Display Installation in Ho Chi Minh City | Linh Anh Advertising
This makes UV printed one-way vision vinyl ideal for vehicle advertising, fleet branding, and event or roadshow vehicles.
2. Tools Required Before Installation
Proper preparation is essential for a smooth installation. Make sure the following tools are ready:
-
Spray bottle filled with clean water mixed with a few drops of baby shampoo or mild soap (to create slipperiness)
-
Plastic squeegee (or an ATM card wrapped with a soft cloth)
-
Sharp utility knife
-
Clean, lint-free cloth
Important note: If the vehicle window has old decals, they must be completely removed. Clean off any remaining adhesive residue before installing the new vinyl.
https://www.facebook.com/share/r/1LaZY93RvY/
3. Step-by-Step Installation Process
🔹 Step 1: Clean the Glass Surface
Thoroughly clean the entire glass surface, especially along the rubber seals. Make sure there is no dust, sand, oil, or leftover glue. Any debris left on the glass can cause poor adhesion or bubbling later.
🔹 Step 2: Spray the Soapy Water
Spray the prepared soapy water evenly over the glass surface where the vinyl will be applied. This layer allows easy positioning and adjustment during installation.
🔹 Step 3: Peel the Backing Paper
Carefully peel off the backing paper from the vinyl. While peeling, spray water onto the adhesive side to prevent it from sticking to itself and to maintain flexibility.
🔹 Step 4: Position the Vinyl
Place the vinyl onto the wet glass surface. Thanks to the water layer, you can slide and adjust the vinyl easily until the graphic is properly aligned and centered.
🔹 Step 5: Squeegee Out Water and Air
Using a squeegee, press firmly from the center outward toward the edges. Repeat this process several times to remove all water and air bubbles trapped between the vinyl and the glass.
🔹 Step 6: Trim the Excess Vinyl
With a sharp utility knife, trim the excess vinyl along the rubber window seals.
👉 Professional tip: Leave a gap of 1–2 mm inside the rubber edge. This helps the vinyl adhere better and prevents peeling during car washes.
🔹 Step 7: Final Touch & Drying
Wipe off any remaining water around the edges with a clean cloth. Allow the vinyl to dry naturally for at least 24 hours. Avoid washing the vehicle during this time.
4. Important Installation Notes
-
Always apply on the exterior side of the glass (adhesive side facing the glass, printed image facing outward).
-
Do not use high-pressure water directly on the vinyl edges.
-
Avoid car washing for the first 24 hours after installation.
-
Use high-quality UV printed one-way vision vinyl for the best durability and color retention.
5. Why Choose a Professional Installation Team?
While small flat windows can be installed DIY, large or curved windows on vans, buses, or trucks require professional experience to ensure:
-
Accurate alignment
-
No edge lifting
-
No long-term bubbling
LINH ANH ADVERTISING specializes in UV printing and professional installation of one-way vision vinyl for vehicle windows in Ho Chi Minh City, offering:
-
High-resolution UV printing
-
Clean, fast, and precise installation
-
Long-lasting adhesion and color durability
📞 Contact LINH ANH ADVERTISING for UV Vinyl Installation
LINH ANH ADVERTISING JSC
📍 Address: 21 Go Xoai Street, Binh Hung Hoa A Ward, Ho Chi Minh City
☎ Hotline: +84 903 690 725
🌐 Website: quangcaolinhanh.com
👉 Free consultation – Fast quotation – On-site survey available.
